(9 products available)
Low wattage LED lights are ideal for the efficient illumination of spaces with limited power supply availability. Among these, the 0.2 watt LED 12 volt lights are highly energy-efficient and versatile lighting solutions that find applications in various settings. They produce a decent amount of brightness while consuming minimal energy, making them an eco-friendly and cost-effective option for illuminating any space.
Available in a wide range of designs, these light-emitting diodes can cater to different requirements, from focusing intense beams on small areas to creating a soft and even glow across larger spaces. Moreover, their voltage compatibility with typical 12-volt systems makes them an excellent option for use in automobiles and marine and RV applications. Additionally, the small form factor of 0.2-watt LEDs allows their use in tight spaces and complicated light fixtures, enhancing their versatility even further.
As the demand for sustainable lighting solutions keeps growing, the 0.2 LED will likely be an integral part of future lighting technologies due to its efficiency and adaptability.
LED lights are available in several varieties that are suitable for different applications. They include:
SMD LEDs
These LEDs are energy-efficient lighting devices mounted on surface printed circuit boards. They are known for their high brightness, low power consumption, and versatility, making them ideal for automotive, commercial, and residential illumination. Available in various color temperatures, they can provide anything from warm to cool white light, depending on the application.
COB LEDs
COB stands for chip-on-board. This LED lighting technology comprises multiple semiconductor chips packaged together as a single module. This configuration helps emit high levels of brightness and gain a uniform light distribution. This makes it ideal for applications like recessed lighting, spotlights, and other uses that require effective light without dark areas in between. In addition, the compactness of COB LEDs enables them to be installed in tight spaces easily.
High-Power LEDs
High-power 12V LED lights produce significant brightness while consuming low wattage, typically around 0.2 watts. They are often used in applications where intense light is needed but where energy consumption should be kept at a minimum. Thanks to their high efficiency, they can even replace traditional incandescent or halogen lights.
LED Strips
These are flexible PCBs mounted with SMD LEDs that are highly versatile for lighting solutions. They are popular for accent lighting, under-cabinet illumination, and backlighting for furniture and displays. The fact that different color temperatures can be selected for these LED strip lights makes them excellent for creating ambiance in any space.
In the commercial domain, the 12 Volt LED has several suitable applications. They include:
Retail Lighting
Retail and OEM stores use 0.2W LEDs for product displays and signage. The small but bright LEDs can help highlight products, drawing customer attention and increasing sales. In addition, their low power consumption makes them ideal for use in places where many lights need to be on for extended periods.
Automotive Lighting
These LEDs are perfect for car dome lights, license plate lights, and underbody lights due to their efficiency and small footprint. They provide reliable, long-lasting lighting for automobile enthusiasts and manufacturers, using less power than traditional car bulbs.
Commercial Signage
Thanks to their brightness and low energy consumption, 0.2 wedge LEDs are widely used to light neon and LED signs in restaurants, storefronts, and other businesses. They ensure the signs remain visible day and night while minimizing energy costs.
Indicator Lights
Bright, small 0.2W LEDs are commonly used on machines, electronic devices, and commercial equipment to indicate status. Since the devices consume so little power, they are ideal for long-term use without frequent replacements, which adds to their dependability in industrial contexts.
Milking Machine Light
Because of their compactness, 0.2W LEDs are ideal for milking machine meters, pipelines, clusters, palters, and other compact machines and tools. They help enhance the modernity of milking equipment used in dairy farms, thus improving the aesthetic value.
Wattage
The wattage is 0.2W, which ensures minimal energy consumption, making it eco-friendly and cost-saving.
Input Voltage
The input voltage is 12V DC. This makes the LED suitable for automotive and battery-operated systems.
Luminous Flux
Luminous flux varies by color and typically ranges between 15 and 20 lumens, depending on the color and the manufacturing brand. However, this ensures sufficient brightness for indicator and accent lighting applications.
Color Temperature
Color temperature varies by model, but it usually ranges from 2700K (warm white) to 6500K (cool white). This provides various options for the ambience intended to be created.
Beam Angle
The beam angle for most 0.2W LEDs is fixed and usually approximately 120 degrees. This means they offer wide light distribution suitable for general lighting purposes.
Design & Dimensions
The typical 0.2W LED has a small, compact design and measures approximately 5 x 2 mm. This compact size allows the LED to be fitted into various appliances.
Durability & Lifespan
Lifespan is approximately 25,000 hours. In addition, it is rugged and durable because the device can withstand frequent on-off cycles and vibrations, which makes them fit for automotive and industrial applications.
Energy Efficiency
Because 0.2W LEDs consume very little power, they are highly energy-efficient. It can lead to significant energy savings over time, as it also supports environmental sustainability efforts and reduces electricity bills.
Brightness
These LEDs are designed to produce bright light using minimal wattage. Luminous flux for the bulb is approximately 20–25 lumens. This level of brightness is suitable for tasks like accent lighting or dashboard illumination.
Color Range
Available in various colors, including warm white, cool white, red, blue, green, and yellow. This makes them versatile for different lighting effects and applications. For instance, red or blue lights can be used as accent lights at home, while warm or neutral white is excellent for general-purpose lighting.
Heat Emission
These LEDs emit very little heat compared to incandescent or halogen bulbs. This reduces the risk of overheating in enclosed fixtures and makes it safe to touch after prolonged use.
Form Factor
The compact size allows them to be installed in various fixtures, from car interiors to decorative lamps and light signs. Their small form factor makes them ideal for applications where space is very limited.
Some of the steps involved in the installation process are as follows:
Remove Old Bulb
Begin with a safety precaution by turning off the power in the area where you will be working. If replacing an old LED 0.2W bulb, gently pull it out of the socket or use a tool to unscrew it for an incandescent or halogen bulb.
Check Compatibility
Ensure the new 0.2W LED bulb is of the same base type and wattage as required by the fixture. Never install a bulb of different base sizes or types, as doing so can cause problems and may even void the warranty.
Insert New Bulb
If the new bulb is of the plug type, align the pins with the slot in the socket and gently push it in. On screwing bulbs, carefully screw the bulb into the socket by turning it clockwise until secured snugly, but do not overtighten.
Turn Power On
Once the new bulb is installed, turn the power back on. Then, check whether the bulb works correctly and emits the intended brightness and color.
When purchasing 0.2W LEDs, there are several important factors that one must consider. They include the following:
Color Temperature
Color temperature is important in how the light appears, ranging from warm to cool white. Warm white (below 3000K) is ideal for creating cozy and comfortable atmospheres in residential areas. In contrast, cool white (above 5000K) is usually suitable for task or commercial lighting. Thus, selecting the appropriate color temperature should be based on the application and ambient atmosphere intended to be created.
Luminous Intensity
Luminous intensity determines the brightness of the LED, so go for LEDs with higher luminous intensity for brighter lighting. Also, the intended application doesn't have to require very bright illumination. For instance, indicator lights or backlights need lower luminous intensity, while general area lighting should be higher.
Beam Angle
The beam angle controls how concentrated or spread out the light will be. Spot LEDs with narrow beam angles will provide focused light, making them suitable for accent or task lighting. In contrast, flood LEDs with wide beam angles are ideal for general illumination as they provide a broader light spread.
Color Rendering Index
This index is used to measure how accurately a light source displays colors compared to natural light. For example, a higher CRI is suitable for retail spaces or galleries where color accuracy is important. Less than that is appropriate for garages and warehouses, as there is no need to render colors accurately in these places.
Durability
Most 0.2W LEDs are built and rated IP65, making them resistant to dust, moisture, and other environmental elements. Therefore, such LEDs will be suitable for outdoor use or in areas prone to harsh conditions. Furthermore, non-glass bulbs are more durable for environments that are sensitive to breakages.
The main advantage of these lights is that they consume less energy while giving the same amount of brightness compared to traditional bulbs. People also love them because they last longer, stay cool, and come in many colors. Moreover, they are good for the environment, help save on electricity bills, and can be used in almost any spot at home or work.
0.2W LED outdoor lights are suitable for outdoor usage as long as they are IP rated. The LED lights that have IP ratings are made to resist moisture and dust, so they are great for gardens, patios, walkways, and other outdoor places that might face weather changes or be dusty. Moreover, their low energy consumption is good for environmentally friendly lighting projects.
These kinds of lights have a lifespan of about 25,000 to 50,000 hours. That is why they do not need frequent replacements, making them a cost-effective lighting choice for various applications. Their durability and long life make them popular in home and commercial lighting systems.
The 0.2W LED lights can be used with dimmer switches that are specifically designed for LED lighting. Therefore, dimmable 0.2W LED lights allow flexibility in brightness levels to create different ambiances in spaces like restaurants, homes, and theaters. Using the right dimmer goes a long way in preventing flickering and ensures smooth, consistent dimming.
The good news is that they need very little maintenance, like wiping off the dust from time to time. Because of their energy efficiency and low heat output, they do not require constant checks or cooling system considerations, like incandescent or halogen bulbs. In addition, their longevity and low power usage make them a practically maintenance-free solution.
浙公网安备 33010002000092号
浙B2-20120091-4