Source smarter with
Leverage AI to find the perfect product match in seconds
Matches from over 100 million products with precision
Handles queries 3 times as complex in half the time
Verifies and cross-validates product information
Get the app
Get the Alibaba.com app
Find products, communicate with suppliers, and manage and pay for your orders with the Alibaba.com app anytime, anywhere.
Learn more

1418325096

(43 products available)

About 1418325096

Types of 1418325096

OEM 1418325096 is a common part number used to refer to a specific auto part. The exact type of 1418325096 can vary depending on the manufacturer and the context in which it is used. Below are some possible types of 1418325096.

  • 1418325096 Spark Plug Wires

    Spark plug wires are used to transport electrify signals from the ignition coils to the spark plugs. The wires are specifically designed for different car models with various lengths and resistances.

  • 1418325096 Fuel Injectors

    Fuel injectors are used to inject fuel into the combustion chamber. They are designed to spray fuel in a fine mist, which allows for easy and quick ignition. The fuel injector comes in different types, such as port fuel injectors and direct fuel injectors, which are designed for different car models.

  • 1418325096 Ignition Coils

    These are used to step up low voltage battery signals to high voltage signals, which are sent to the spark plugs. The ignition coils are designed in different types, such as cylinder-based ignition coils and coil packs, which are used in different car models.

  • 1418325096 Engine Control Module (ECM)

    The engine control module is a computer that controls various engine functions. It controls engine functions, such as fuel injection timing, ignition timing, and variable valve timing. The ECM is programmed with specific parameters for each engine model to optimize performance and emissions control.

  • 1418325096 Throttle Actuator Control (TAC)

    The throttle valve is an electronic component that controls the amount of air entering the engine. It is connected to the accelerator pedal position sensor (APPPS) and the engine control module (ECM). When the accelerator pedal is pressed, the APPPS sends a signal to the ECM, which instructs the TAC to open the throttle and increase engine speed.

Specification and Maintenance of 1418325096

Specification

  • 1. Compatibility:

    1418325096 airbag module must be used in vehicles for which it was designed. This is because every module is designed to function in a specific type of vehicle with a specific configuration. This includes taking into consideration the number of seats, the seating positions, and the layout of the vehicle.

  • 2. Input Voltage:

    In most cases, 1418325096 airbag modules operate on the vehicle's electrical system of 12 volts. This is with a range of 9-16 volts being accepted. In the case of a significant variance from the accepted range, it could result in the module not functioning correctly or possibly being damaged.

  • 3. Power Consumption:

    The 1418325096 airbag modules do not use a lot of power. They are designed to use around 100 milliwatts (mW) of power. This is equal to 0.1 watts (W). To put this into perspective, a light bulb uses 100 times more power than this.

  • 4. Activation Time:

    The 1418325096 airbag module is designed to be deployed within a short time frame. This is because it is designed to be deployed in a crash that is severe enough to cause injury. The deployment time is typically between 20 ms (milliseconds) to 50 ms (milliseconds). During this time, the airbag module will inflate. This inflation occurs in a short time frame and can be completed within 20 to 50 milliseconds after a severe collision.

  • 5. Communication Protocol:

    The 1418325096 airbag module is designed to communicate with other modules in the vehicle. This is done using a Controller Area Network (CAN) protocol. This is basically a communication protocol that allows different modules in the vehicle to communicate with one another.

  • 6. Crash Sensors:

    Crash sensors for the 1418325096 airbag module are located throughout the vehicle. These sensors monitor the vehicle and look for signs of a crash or collision. They do this by monitoring parameters like the vehicle's speed, acceleration, and deceleration. In the event of a collision, the crash sensors will send a signal to the airbag module, prompting it to deploy.

  • 7. Output Signals:

    The 1418325096 airbag module generates output signals. It sends these signals to the airbags to inflate them during a crash. The module will also send signals to pretensioner systems to activate them. Pretensioner systems work by tightening the seat belt on the occupant of the vehicle.

  • 8. Self-Diagnosis:

    The 1418325096 airbag module is designed with a self-diagnostic system. This self-diagnostic system allows it to monitor and check for any malfunctions. It will check the module itself, the sensors, and the airbags. If any problem or fault is detected, it will set a diagnostic trouble code (DTC) and illuminate the airbag warning lamp on the instrument panel. This will alert the driver, letting them know there is a problem with the airbag system.

  • 9. Temperature Range:

    The 1418325096 airbag module is designed to function in a wide range of temperatures. In most cases, the modules operate in an ambient temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). In extreme temperatures, the module may not function properly or could be damaged.

  • 10. Size and Weight:

    The 1418325096 airbag module is compact and lightweight. It is usually around 10 centimeters (4 inches) long, 8 centimeters (3 inches) wide, and 2 centimeters (0.8 inches) high. The module's weight is typically around 200 grams (0.44 pounds). This allows for easy installation of the module in the vehicle.

Maintenance

To ensure the proper functioning of the 1418325096 airbag module, regular maintenance of the airbag system is required. The following guidelines can help:

  • 1. Regularly inspect the airbag system for any signs of damage or wear, such as the airbag module, wiring, and connectors.
  • 2. Ensure that the airbag system is not exposed to extreme temperatures, humidity, or moisture.
  • 3. After any vehicle crash, have a qualified technician inspect and repair the airbag system, even if the airbags did not deploy.
  • 4. Keep the airbag system free of dust, dirt, and debris. This can be done by regularly cleaning it with a soft cloth.
  • 5. Ensure that no modifications are made to the airbag system, such as disconnecting the airbags or installing a different airbag module.
  • 6. If the vehicle's electrical system has any issues, such as a dead battery or faulty alternator, have it repaired as soon as possible. Airbag modules rely on the electrical system to function correctly.
  • 7. Follow the manufacturer's recommendations for maintaining the airbag system, including any required inspections or replacements.
  • 8. Have the airbag system checked periodically by a qualified technician. They have the necessary tools and equipment to diagnose and repair any problems or issues.

How to choose 1418325096

Choosing the correct part of 1418325096 can be a challenging task. Here are some tips to help choose the right 1418325096.

  • Vehicle Compatibility

    When choosing a 1418325096, it is important to consider whether it is compatible with the specific car model and brand. If the 1418325096 is not compatible with the car brand, it may not function properly.

  • Quality

    It is important to choose a high-quality 1418325096. The 1418325096 of good quality is more expensive, but it is a long-term investment. The 1418325096 will last longer and function properly, which will save money on repairs and replacements.

  • Price

    When choosing a 1418325096, price is an important factor to consider. It is important to choose a 1418325096 that is affordable and within the budget. However, it is important not to choose a 1418325096 that is too cheap because it may be of poor quality.

  • Reviews and Recommendations

    It is important to research and read reviews of the 1418325096 before making a choice. This will help understand the experiences of other users and the quality of the 1418325096. It is also important to ask for recommendations from friends and family.

  • Warranty

    When choosing a 1418325096, it is important to consider the warranty. It is important to choose a 1418325096 that has a good warranty period. This will ensure that if the 1418325096 has any defects, it will be replaced or repaired.

  • Supplier

    It is important to choose a 1418325096 from a reputable supplier. This will ensure that the buyer gets the original 1418325096 and not a counterfeit. It is also important to choose a supplier that offers after-sales services such as delivery and customer support.

How to DIY and Replace 1418325096

Most truck and trailer air brake parts, including 1418325096, require professional installation. However, some simple steps can help maintain these parts. When maintaining air brake parts, ensure the safety of the technicians and the vehicle owners. The vehicle's air brake system is under high pressure, ranging from 90 to 120 psi. A sudden release of this pressure can cause serious injuries or damage to the vehicle. Use proper safety equipment, such as safety glasses and gloves, to protect against potential hazards. Before starting any maintenance or repair work, thoroughly read the service manual for the specific truck or trailer model. The manual provides important safety information and step-by-step procedures for disassembling and reassembling the air brake system.

As mentioned earlier, maintenance is the best way to ensure the longevity of air brake parts. To maintain the 1418325096 air brake valve, check the service manual for the recommended maintenance schedule. Perform regular inspections to identify wear and tear, such as cracks or damage to the valve body, seals, and springs. Before making any repairs, ensure the vehicle's air brake system is depressurized. Follow the procedures in the service manual to release the air pressure and verify it with appropriate gauges. Use genuine replacement parts that meet the manufacturer's specifications when repairing or overhauling the valve. Avoid using salvaged or inferior quality components that may compromise the valve's performance and reliability.

Because of the technicality of the 1418325096 air brake valve, it is recommended that only certified and trained technicians authorized by the manufacturer handle any repairs or maintenance. DIYers can do minor maintenance like cleaning, inspecting, and changing the air dryer filter. When DIYing, ensure the technician has the necessary tools, such as wrenches, socket sets, screwdrivers, and torque wrenches. Have pressure gauges, flow meters, and other diagnostic tools to assess the valve's performance and air system parameters.

Q and A

Q1: What does the 1418325096 mean?

A1: 1418325096 is a general Motors part number for an accessory, often a truck accessory. Parts with this number can be looked up to find out the exact car they are meant for.

Q2: Does the 1418325096 mean, 1418 3250 996

A2: No, it is just a way of writing the number. 1418325096 is read as 1418 3250 996. The first 4 numbers 1418 usually indicate the brand, and the rest are often used as internal codes.

Q3: Can I purchase a part with this number if I don't have a truck?

A3: Yes, it can be a useful accessory for any truck. For example, a truck bed extender can be useful for carrying long lumber. It can be used on any truck, including rentals.

Q4: Can I use a 1418325096 part on any truck, even if it is not from GM?

A4: Some 1418325096 parts are only compatible with GM trucks. They have been tested to work with the specifications of the truck model. The user should confirm whether the accessory is compatible with other brands of trucks.