(32 products available)
Ready to Ship
Ready to Ship
There are several types of 4g15m engines based on the configuration and the number of cylinders. They are as follows.
4G11 engines
These engines have a 1.1 L (1,119 cc) displacement capacity. The bore and stroke measure 70 mm and 77 mm, respectively. They are quite rare and were used in the early Mitsubishi Galant models.
4G12 engines
These engines have a 1.2 L (1,199 cc) displacement capacity. The bore and stroke measure 72 mm and 75 mm, respectively. They are commonly found in Mitsubishi vehicles like the Mitsubishi Lancer, Mitsubishi Colt, and Mitsubishi Galant.
4G13 engines
These engines have a 1.3 L (1,297 cc) displacement capacity. The bore and stroke measure 75 mm and 82 mm, respectively. These engines are more powerful and are commonly found in modern Mitsubishi vehicles.
4G14 engines
These engines have a 1.4 L (1,368 cc) displacement capacity. The bore and stroke measure 76 mm and 82 mm, respectively. They are often used in more affordable Mitsubishi vehicles like the Mitsubishi Space Star and Mitsubishi Mirage.
4G15 engines
These engines have a 1.5 L (1,468 cc) displacement capacity. The bore and stroke measure 81 mm and 87 mm, respectively. The 4G15 engines are the most popular and are used in a wide range of Mitsubishi vehicles as well as in vehicles from other manufacturers under license.
4G16 engines
These engines have a 1.6 L (1,598 cc) displacement capacity. The bore and stroke measure 85 mm and 88 mm, respectively. These engines are used in higher-performance vehicles, such as the Mitsubishi Lancer Evolution.
The specifications of 4g15m engines vary widely depending on the vehicle they are installed in. However, some general specifications include the following:
Displacement
The total volume of the engine's cylinders is known as displacement. It affects how much power the engine can produce. A higher displacement means that more air and fuel can enter the cylinders, resulting in more power. The 4g15m engines have a displacement of 1.5 liters or 1500 cc.
Configuration
4g15m engines are in-line 4 engine configurations. In-line 4 engines have four cylinders arranged in a single row.
Valves
Valves control the flow of air and fuel in and out of the engine's cylinders. The 4g15m engines have two valves per cylinder, making a total of eight valves.
Power output
The amount of power the engine can produce is referred to as power output. The 4g15m engines produce between 70 and 100 horsepower, depending on other factors such as the type of fuel used and the vehicle's weight.
Torque
The twisting force that the engine produces is known as torque. The 4g15m engines produce between 90 and 120 Nm of torque.
Fuel system
The fuel system stores fuel and delivers it to the engine. Carburetors and fuel injectors are the two types of fuel systems. 4g15m engines use either a carbureted or fuel-injected system. Carbureted systems are more common in older vehicles, while fuel-injected systems are more common in modern vehicles.
Ignition system
The ignition system is responsible for igniting the air/fuel mixture in the engine's cylinders. Spark plugs and ignition coils are used in 4g15m engines to create a spark to ignite the mixture. The ignition timing (when the spark is generated) can be adjusted manually or electronically, depending on the engine's design.
Fuel type
While the 4g15m engines are designed to run on petrol, the type of petrol used can affect their performance. Vehicles with high-performance 4g15m engines require high-octane fuel (RON 95 or 98). However, most 4g15m engines can run on regular unleaded petrol (RON 91).
Cooling system
The cooling system keeps the engine from overheating. This is important because overheating can cause significant damage to the engine. 4g15m engines use liquid cooling systems that circulate coolant through the engine's cylinders and then to the radiator, where the coolant is cooled before being circulated again.
Oil system
The oil system lubricates the moving parts in the 4g15m engine to reduce friction and prevent wear and tear. It also helps to remove dirt and debris from the engine. The oil system consists of an oil pump, oil filter, and oil passages. Regular oil changes are essential to maintain the 4g15m engine's performance and longevity.
It is important to maintain the 4g15m engine regularly to ensure it works efficiently and lasts a long time. Here are some tips on how to maintain it:
Use the right type of oil
Engine oil lubricates and protects the moving parts in the engine. Using the correct type and viscosity of engine oil is important for proper maintenance. For most 4g15m engines, synthetic or semi-synthetic engine oil with a viscosity rating of 5W-30 or 10W-30 is recommended.
Regular oil changes
Regular oil changes are important for optimal engine performance. Changing the engine oil every 5,000 to 10,000 kilometers (or every six months) is recommended. Additionally, oil filters should be changed simultaneously to trap impurities and maintain clean engine oil.
Regular tune-ups
Regular tune-ups keep the 4g15m engine running smoothly. During a tune-up, the spark plugs, spark plug wires, ignition coils, air filter, fuel filter, and PCV valve will be checked. The technician will also check the ignition system timing, clean or replace the air and fuel filters, and perform other necessary maintenance tasks.
Keep the cooling system in good condition
The radiator, water pump, thermostat, hoses, and coolant level should all be checked regularly to ensure the cooling system works properly. The coolant should also be changed every 40,000 to 60,000 kilometers (or every two years) to maintain its effectiveness.
Use the right fuel
Using the correct fuel is essential for proper engine maintenance. Most 4g15m engines run on regular unleaded petrol (RON 91), while some high-performance variants require high-octane fuel (RON 95 or 98). Always refer to the manufacturer's guidelines for the recommended fuel type.
Check and maintain the timing belt
The timing belt synchronizes the engine's crankshaft and camshaft movements. It is important to check the timing belt tension and condition regularly. The timing belt should be changed every 60,000 to 100,000 kilometers (or every five years), depending on the manufacturer's recommendations.
Regular checks and maintenance
It is important to routinely check and maintain the oil level, tire pressure, air filter, coolant level, brake fluid level, and other fluids in the 4g15m engine. Additionally, the suspension, steering, brakes, and electrical systems should be checked to ensure that all the engine components are in good condition.
Avoid overloading
Avoid overloading the vehicle, as this can strain the 4g15m engine and reduce its performance. If towing is required, refer to the manufacturer's guidelines for the maximum towing capacity.
By following these simple maintenance tips, the 4g15m engine can run smoothly and efficiently for many years.
Understanding the vehicle's requirements
Read the owner's manual or search the internet for the car's make, model, and production year to learn the needed engine specifications. Look for information on the recommended engine type, horsepower, torque, and any other relevant details. This will help find an engine that will work well with the car.
Compatibility
Consider if the engine will physically fit in the space available in the vehicle. Search for information on how well the engine matches the transmission system, motor mounts, and exhaust system. Also, think about the electrical components, cooling system, and other things that have to work together with the engine. They must also be compatible.
Performance requirements
Decide on the level of performance that is wanted from the engine. An engine with more horsepower and torque will provide better acceleration and handle heavy loads or towing more easily. However, it may use more fuel. One that is more fuel efficient will save money on gas but may have slower acceleration. Consider the driving needs - is the focus more on speed, towing capacity, or good fuel economy?
Fuel type
Find out if the vehicle was originally designed to run on petrol or diesel fuel. It is important to choose an engine that uses the same type of fuel as the car. This is necessary for proper operation and performance. Using an engine designed for one fuel type on a car built for another could cause major problems and damage.
Emissions regulations
Check what emissions standards were in place when the vehicle was made. An older car may have lower emissions requirements than a newer one. Ensure the 4g15m engine chosen meets the emissions rules for the vehicle's age. Otherwise, it may not pass emissions testing.
Future proofing
Consider the future requirements for the engine. If plans are made to keep the vehicle for a long time, think about how well the engine will continue to perform as the car gets older. An engine with proven durability and reliability over many years would be a good choice.
Cost
Decide on a budget for the engine and any additional parts needed. Remember to factor in costs for installation, maintenance, and repairs. Research which engines provide the best value based on performance, longevity, and all other important aspects.
DIY replacement of the 4g15m engine can be complex and may require professional assistance. However, here are some basic steps that can be taken to replace the engine:
Q1: How do I identify if my vehicle has a 4g15m engine?
A1: This information can typically be found in the owner's manual or by contacting the manufacturer. Alternatively, the engine code can often be found on a label or stamped directly onto the engine block.
Q2: Can the 4g15m engine be used in any vehicle?
A2: No, each vehicle is designed to be compatible with specific engines. However, the 4g15m engine is used in many vehicles, particularly in older models of Mitsubishi and some other brands.
Q3: What is the 4g15m engine?
A3: The 4g15m engine is a model of the gasoline engine produced by Mitsubishi Motors. It's a 4-cylinder engine with a displacement of 1.5 liters (or 1498 cc).
Q4: What does the ""G"" in the engine code signify?
A4: The ""G"" in the engine code signifies that it is a gasoline-powered engine.
浙公网安备 33010002000092号
浙B2-20120091-4