(798 products available)
EEC 49cc refers to the European Economic Community regulations that permit member states to authorize the use of mopeds and scooters with engines up to 49cc. This means that the riders do not need a license or insurance to ride these bikes. The EEC 49cc scooters have different types, including:
Electric scooters:
The EEC 49cc electric scooter has a battery capacity of 48 volts and above, allowing it to travel for long distances at high speed. The battery charges in about four to six hours, and some scooters have a fast-charging feature that allows the battery to charge in two hours. The scooters also have a battery management system that optimizes the battery's efficiency and performance.
Petrol scooters:
The EEC 49cc petrol scooters have engines that use petrol as fuel. Some scooters have advanced cooling systems that enable the scooter to run for long hours without overheating. The scooters also have low fuel consumption, allowing them to deliver high mileage. The EEC 49cc petrol scooters produce fewer emissions and are environmentally friendly.
Manual scooters:
The EEC 49cc manual scooter has a 49cc engine and a 5-speed manual transmission that allows the rider to control the gear shifts. The rider shifts the gears using a foot pedal and hand control on the handlebar. The manual scooters have a higher acceleration rate and are suitable for riding on hilly terrains.
Automatic scooters:
The EEC 49cc automatic scooter has a 49cc engine and a 3-speed automatic transmission. The scooter's transmission system automatically adjusts to the riding conditions without the rider's intervention. The automatic scooters are easy to ride and are suitable for urban environments with lots of traffic.
The EEC 49cc moped scooter is popular because of its affordable and low-cost commuting. Understanding the specifications and maintaining the EEC 49cc moped scooter is essential for retailers to offer the best to their customers. Here are the key specifications and maintenance tips for the EEC 49cc moped.
Engine:
The EEC 49cc moped scooter has a single-cylinder, air-cooled, 2-stroke or 4-stroke gasoline engine. The engine generates a maximum output of 3-4 horsepower and a maximum torque of 2-3 Nm. The engine is designed for low-speed operation and low noise.
Transmission:
The EEC 49cc moped scooter has a continuously variable transmission (CVT) with a belt. The transmission is designed for smooth acceleration and deceleration.
Frame:
The EEC 49cc moped scooter has a steel or aluminum alloy frame. The frame is designed to be lightweight and strong. The moped scooter has a length of 1,600-1,800 mm, a width of 600-700 mm, and a height of 1,000-1,200 mm.
Wheel:
The EEC 49cc moped scooter has front and rear wheels with a diameter of 10-12 inches. The wheels are designed for good grip and stability on the road.
Brakes:
The EEC 49cc moped scooter has front and rear wheels with disc or drum brakes. The brakes are designed for good stopping power and reliability.
Suspension:
The EEC 49cc moped scooter has front and rear suspension systems with telescopic forks and spring shock absorbers. The suspension system is designed for good handling and comfort.
Lighting:
The EEC 49cc moped scooter is equipped with headlights, taillights, and turn signals. The lights are designed to be bright and energy-efficient.
Seating:
The EEC 49cc moped scooter is designed with a single seat or a seat for two passengers. The moped scooter has a seat height of 700-800 mm.
Fuel:
The EEC 49cc moped scooter has a fuel tank capacity of 5-7 liters. The fuel tank is designed for long-distance travel and commuting on the road.
For the EEC 49cc moped scooter to function properly and safely, it is important to carry out regular maintenance. Here are some maintenance tips.
Following these specifications and maintenance tips, the EEC 49cc moped scooter can function properly and safely, providing users with a convenient and affordable means of transportation.
Choosing the right EEC 49cc moped can be a challenging task because of the numerous options available. Here are some of the things to consider:
Consider the EEC 49cc moped bike type
When going for an EEC 49cc moped, the first thing to consider is the type. The moped comes in three different types:
Pedal-assist EEC 49cc moped: This type of moped has to pedal like traditional bicycles. The rider pedals to activate the motor, which provides additional power. The motor assists the rider only when the rider pedals. It is a great option for people that want some workout while riding.
Throttle-assist EEC 49cc moped: This type of moped does not have to pedal. It allows the rider to use a throttle to activate the motor and provide assistance. The rider can activate the motor with the throttle without pedaling. This type of moped is ideal for people that want more power without physical effort.
Hybrid EEC 49cc moped: This type of moped combines both pedal and throttle-assist systems into one. The rider can choose the mode that suits their riding style or needs. The hybrid moped offers more versatility and adaptability to different preferences and terrains.
Check the EEC 49cc moped bike design
After considering the type of EEC 49cc moped bike, the next thing to consider is the design. The moped comes in different designs, such as:
Frame design: Consider the frame design of the moped, whether it is a step-through or traditional bicycle style. The frame design determines how easy it will be to mount and dismount the moped.
Wheel size: The EEC 49cc moped comes with different wheel sizes. A larger wheel size offers more stability and smoother rides on rough roads, while a smaller wheel size provides more agility and maneuverability.
Suspension system: Consider the suspension system of the moped, whether it is a front fork or full suspension. A good suspension system absorbs shocks from bumps or potholes in the road.
Check the EEC 49cc moped bike performance
Performance is another important factor to consider when choosing an EEC 49cc moped bike. Consider the following:
Motor power: The moped motor power ranges from 200W to 750W or more. Higher motor power offers more speed and acceleration, while lower motor power provides more energy efficiency and a reasonable riding speed.
Battery capacity: The battery of the moped is measured in Ah or Wh. A higher battery capacity offers more range and longer life than lower battery capacity.
Gearing system: EEC 49cc moped bikes come with different gearing systems. Some have internal hub gears, while others have derailleur systems. Hub gears offer low maintenance and smooth gear shifting, while derailleur systems offer more gear range and efficiency.
Consider additional features
After considering performance, the next thing to consider is additional features that come with the EEC 49cc moped bike. These additional features include:
Brakes: The moped can come with rim or disc brakes. Disc brakes offer more stopping power and durability in wet conditions than rim brakes.
Lighting system: Consider the lighting system of the moped, whether it has LED or halogen lights. LED lights offer brighter illumination and energy efficiency than halogen lights.
Accessories: Some EEC 49cc moped bikes come with additional accessories like racks, fenders, and mudguards. These accessories add more comfort and convenience to the ride.
Test ride
After considering all the factors discussed above, it is important to test ride the EEC 49cc moped bike before buying it to ensure it fits perfectly.
Many scooters, mopeds, and small motorcycles have EEC 49cc engines. These vehicles usually have standard maintenance and repair procedures. To replace an EEC 49cc engine, the following steps must be followed:
Step 1: Safety Precautions
Before starting the process, make sure to read the user manual of the vehicle. Understand the basic maintenance practices of the vehicle. Go through the engine replacement instructions provided by the manufacturer. This will help to know the steps to follow when replacing the engine. Ensure to have the right tools that will be used to replace the engine. These tools should help in disassembling and assembling the engine parts. To keep safe, use protective gear such as gloves and safety glasses.
Step 2: Prepare the Vehicle
Before starting the replacement process, ensure the vehicle is parked in a safe environment. The vehicle should have enough space where it can be worked on without any disturbance. Ensure to disconnect the battery of the vehicle before starting the replacement process. This will help to prevent any electrical issues from occurring. The vehicle should be drained of any fluids such as oil or fuel before starting the process. Make sure to store the fluids in a safe environment away from any hazards.
Step 3: Disassemble the Engine
To replace the old engine, first, disconnect all the cables and electrical connections that are connected to the old engine. This includes unplugging the ignition system and disconnecting the starting system's cables. After all the connections are disconnected, start removing the engine from the vehicle. Loosen the bolts and screws that are holding the engine in place. Carefully lift the old engine from the vehicle and place it on the workbench. Disassemble the engine by removing all the external parts. This includes the cooling system, exhaust system, and intake system.
Step 4: Install the New Engine
Before installing, ensure the new engine is cleaned and all the external parts are installed. Then, carefully install the new engine into the vehicle. Secure it with bolts and screws to hold it in place. Reconnect all the cables and electrical connections that were disconnected in step 3. This includes the ignition system cables and the starting system cables. Once everything is connected, ensure to follow the manufacturer's instructions. This is done to ensure the engine is working properly after the replacement.
Step 5: Final Checks
Once the new engine is installed and all the connections are made, refill the engine with the right fluids. This includes the oil and coolant. Start the engine and let it run for a few minutes. This helps to ensure everything is working properly. After running the engine for a few minutes, check if there are any leaks. This could be from the cooling system or the oil system. Once everything is done, ensure to dispose of the old engine and any other removed parts in a safe and environmentally friendly way.
Q1: Are 49cc EEC scooters slower than other scooters?
A1: No, the EEC 49cc scooters are not slower than other scooters. The speed of a scooter depends on various factors, including the engine size, type, and regulations in different countries. However, EEC 49cc scooters are designed to meet specific regulations that limit their speed.
Q2: Can I ride a 49cc EEC scooter without a license?
A2: In most countries, you don't require a special license to ride an EEC 49cc scooter. However, some places require riders to have at least a car driving license. Always check the local regulations to ensure compliance.
Q3: Can a 49cc EEC scooter be modified for higher speed?
A3: Technically, a 49cc EEC scooter can be modified to achieve higher speeds. However, modifications can void the warranty, affect reliability, and potentially be illegal in many jurisdictions. Additionally, modified scooters may not comply with emission standards.
Q4: How fast can a 49cc EEC scooter go?
A4: A 49cc EEC scooter can reach speeds of 30 to 40 mph (48 to 64 km/h). The speed varies depending on the scooter model, road conditions, and rider weight.
Q5: Is a 49cc EEC scooter good for long-distance travel?
A5: A 49cc EEC scooter is not recommended for long-distance travel. Its engine is designed for short commutes, and long trips can strain the engine. For long-distance travel, consider a scooter with a larger engine size and better fuel efficiency.
浙公网安备 33010002000092号
浙B2-20120091-4