(339 products available)
Ready to Ship
4G63T (Evo 1-3)
The first three generations of the Lancer Evolution utilized a 2.0-liter inline-four engine called the 4G63T. This engine was turbocharged and had a DOHC 16-valve cylinder head. It was known for its strong performance and tuning potential, making it a favorite among rally teams and enthusiasts. The 4G63T provided quick acceleration and responsive power delivery, contributing to the Evolution's sporty character.
4G64 (Evo 4-6)
With the fourth generation, Mitsubishi shifted to a new engine platform. The Lancer Evolution IV, V, and VI models were equipped with the 4G64 engine. This 2.0-liter inline-four engine was also turbocharged and featured a DOHC 16-valve cylinder head. The 4G64 engine offered improved performance over its predecessor, with more power and torque available. It further enhanced the Evo's capabilities in acceleration and overall driving dynamics.
4B11T (Evo 10)
The tenth generation of the Lancer Evolution introduced a new engine once again. The Evo X used the 4B11T engine, a 2.0-liter inline-four turbocharged engine with a DOHC 16-valve cylinder head. The 4B11T engine was designed for efficiency and low emissions while maintaining strong performance. It featured advanced technologies like MIVEC (Mitsubishi Innovative Valve timing Electronic Control) System, which optimized valve timing for better power delivery and fuel efficiency.
4B11T (Evo 9)
The Evo 9 also utilized the 4B11T engine, the same as the Evo 10. However, some variants of the Evo 9 had slight differences in tuning and specifications to meet different market regulations and performance standards. Generally, the Evo 9's engine provided a good balance of power, responsiveness, and environmental performance.
The Evo 8 engine specifications include the following:
When it comes to maintaining the Evo 8 engines, here are a few tips to help keep the engines in good condition:
Choosing the right Evo 8 engine can be quite a challenge for retailers. Here are some of the factors they need to consider before purchasing any Evo 8 engine:
Know the Audience
Understanding the target market is key. Is the audience looking for a high-performance engine for racing, or is it for daily commuting? Knowing this will help select the engines that fit their needs.
Evaluate the Engine Specs
When choosing an Evo 8 engine, look at the specifications. The retail should consider the displacement, power output, torque, and other relevant specs. This will help understand the performance level of each engine.
Consider Emission Standards
Depending on the region, there could be strict emission standards for vehicles. Ensure the chosen Evo 8 engines meet these standards to avoid any legal issues or penalties.
Ease of Installation and Maintenance
Some engines may require complicated installation processes or have components that are difficult to access for maintenance. Choose an Evo 8 engine that offers easy installation and hassle-free maintenance.
Cost
While cost shouldn't be the only deciding factor, it's still important to consider. Compare the features and performance of different Evo 8 engines and choose one that offers good value for the money.
It's important to note that replacing an EVO 8 engine can be complex and may require specialized knowledge and tools. Mitsubishi Lancer EVO 8 engines are highly skilled and recommended for such tasks. However, if the DIY approach is to be considered, here are some general steps to guide the process.
Gather the necessary tools and materials
Find the owner's manual and service manual for the specific EVO 8 model. The manuals provide detailed instructions and specifications for disassembly and reassembly. Have all the necessary tools, such as sockets, wrenches, pliers, torque wrenches, engine hoist, and engine stand. Also, have the replacement engine ready, along with new gaskets, bolts, and other necessary components.
Prepare the vehicle
Park the vehicle in a clean, well-ventilated, and spacious area. Disconnect the battery and ensure safety.
Drain fluids
Drain all fluids from the engine, including motor oil, coolant, and windshield washer fluid. Dispose of the fluids according to local regulations.
Remove the old engine
Follow the instructions in the service manual to disassemble the necessary components and remove the old engine from the vehicle carefully. This may include removing the intake system, exhaust system, electrical connections, cooling system, oil system, and engine mounts. Lift the engine using an engine hoist and remove it from the vehicle.
Prepare the new engine
Transfer all necessary components from the old engine to the new one. Make sure everything is clean and in good condition.
Install the new engine
Follow the instructions in the service manual to install the new engine. Reinstall all components removed during the engine removal process. Ensure all connections are secure and torqued to the specified values.
Reconnect electrical and cooling systems
Reinstall the electrical connections and cooling systems, including the radiator and hoses. Fill the cooling system with the recommended coolant.
Oil and fluids
Install the engine with new motor oil and other necessary fluids. Check for leaks and address any issues.
Final checks and test drive
Verify that all components are installed correctly and perform a final inspection. Start the engine and let it run for a few minutes. Check for unusual noises or vibrations. Once satisfied, take a test drive to ensure everything functions properly. Monitor the engine's performance and check for any issues after the test drive.
Q1: How much horsepower does the Evo 8 engine have?
A1: The Evo 8's engine, known as the 4G63, produces around 276 horsepower. However, this number may vary depending on the specific model and market regulations.
Q2: What is the displacement of the Evo 8 engine?
A2: The Evo 8 engine has a displacement of 2.0 liters, which is equivalent to 1997 cubic centimeters (cc).
Q3: What is the turbocharger used in the Evo 8 engine?
A3: The Evo 8 engine uses a turbocharger called the MHI TD05HR-16G-6, which is a twin-scroll turbocharger. It provides quick spool-up and improved efficiency, contributing to the engine's performance.
Q4: What type of fuel does the Evo 8 engine run on?
A4: The Evo 8 engine is designed to run on premium unleaded gasoline with a minimum octane rating of 91 RON (Research Octane Number) or 95 PON (Pump Octane Number) to ensure optimal performance and prevent knocking.
The web search volume for the keyword "evo 8 engine" has shown a consistent average monthly web search volume of 880, with a notable one-year decrease of 18%. Over the past three months, there has been no change in web search volume, maintaining a steady rate.
Analyzing the detailed monthly search data, we observe a pattern where the web search volume remains at 880 from December to June, except for two dips in May and September, where it drops to 720. This fluctuation suggests a minor seasonality effect, with peaks in the winter and spring months, and slight declines in late summer and early autumn.
The stability in web search volume for most of the year, coupled with these specific dips, indicates that interest in the "evo 8 engine" is generally steady but subject to slight variations. These variations could be influenced by external factors such as automotive events, new car releases, or related news in the vehicle parts and accessories category, which typically garner more attention during certain times of the year.
浙公网安备 33010002000092号
浙B2-20120091-4