Foton auman concrete mixer truck

Types of Foton Auman Concrete Mixer Trucks

A Foton Auman concrete mixer truck is a special kind of vehicle used to transport and mix concrete for building projects on the go. There are a few different kinds of concrete mixer trucks. Some mix the concrete while moving, and others are stationary but mobile. Moreover, the capacity is another way to categorize them.

• Rotating Mixers: These mixer trucks have drums that keep turning while the truck moves forward. By constantly spinning, they prevent the concrete from hardening up inside the drum. This is really important because if the concrete sets, it will be ruined, and the truck will have a big mess in it. Some examples of rotating mixer trucks are the Foton 6X4 concrete mixer truck or the smaller version, the Foton 4X2 concrete mixer truck. These trucks are great for making sure the concrete is fresh and usable for construction workers whenever they get to the building site.
• Non-Rotating Mixers: Non-rotating trucks have drums that mix the concrete but do not spin while the truck moves. Instead, the drum is rotated in a fixed position while the concrete ingredients are put in from different sides. After everything has been mixed, the drum can be turned to take out the ready-mixed concrete. These non-rotating trucks might be good for some construction projects, but they aren't as commonly used as the trucks that have drums that turn while driving.
• Rear-Discharge Mixers: Rear-discharge trucks are the ones that back up to the spot where the concrete is needed, and then they pour the concrete out from their drum. The driver can easily see where they are going when reversing, so they can accurately and safely deliver the mixed concrete to the right place without any hassle.
• Front-Discharge Mixers: In front-discharge trucks, the operator can control the drum from the front side. This way, the concrete can be precisely put where it is needed the most easily, conveniently, and safely. Also, these trucks normally come with a bigger cab that can hold extra people inside.

Another way to look at concrete mixer trucks is by the amount of concrete they can carry. For example, some are bigger and can hold a lot, like 12 cubic meters. These big ones are called 12m3 concrete mixer trucks. There are also 10m3, 8m3, 6m3, 5m3, 3m3, and even 2m3 mixer trucks for smaller jobs. The 2m3 trucks are the tiniest ones.

Specification & Maintenance

Specification

• Cab

  Last generation Auman cabs, distinguished by stylish and aerodynamic shapes. Full-width, two-door cabs are available in three different styles: the standard style double sleeper cab, single sleeper cab with a book-style flip-down bed, and open book double sleeper cab. The cab can be either a 6x4, 8x4, or 10x4 configuration, and it's coupled with an intelligent ECU fuel-saving system that allows for automatic idle management, fatigue driving, a mechanic diagnostic interface, a voice air conditioning system, a GPS real-time tracking management system, electronic braking control, and many other intelligent functions.

• Concrete Mixing Mahcines

  A concrete mixer truck generally consists of a storage barrel and a stirring system. The storage barrel can be of a planetary type or a shaft-driven horizontal type. The stirring units are usually made of high-strength steel and titanium alloys, and they can have a double helix or single helix design. Mixer truck machines can have a storage capacity ranging from 7 to 22 cubic meters, while in-transit mixers can carry anywhere between 6 and 16 cubic meters. For Foton mixer trucks in particular, their storage barrels and stirring units have an anti-twist design, which can prevent the concrete from solidifying during the mixing transportation process. In addition, these mixer trunks can be equipped with split-type, sealed, hydropneumatic reverse pumping systems. They also have double-reduction, fully-helicoidal transmission forms and floating seal technology to reduce the pollution of natural resources.

  There are two main types of concrete mixers that can be found in a concrete mixer truck: pan concrete mix machine and twin shaft concrete mix machine. A pan concrete mix machine has a unique mixing pan design that guarantees uniform concrete mix and offers great mixing efficiency. Its vertical mixing axis allows for easy upward and downward movement of the mixture. Also, the installation and maintenance of a pan concrete mix machine is very easy, and it takes up less space. A twin-shaft concrete mix machine has two horizontal shafts that mix material and ensures thorough and uniform concrete mixing. It has high production efficiency and provides great flexibility, as it can be used to produce various types of concrete such as commercial, ordinary, and specialized solidifying cement.

• Power System

  Foton mixer trucks can be equipped with either diesel engines, new energy power systems, or hybrid power systems. The strong power system and high-torque transmission can ensure efficient concrete mixing and transportation even in harsh road conditions. The intelligent fuel-saving system ensures that the truck will have enough energy to keep the concrete mixer barrel rotating, thus preventing the solidification of the cement. Thanks to their powerful engines, Foton mixer trucks can adapt to different kinds of hazardous constructions at high elevations, such as the archaic work, underground tunnel, and high-purity tunnel. Their intelligent operating system can also help them adapt to a temperature range of -30℃ to 50℃. In addition, they possess a hill start assistant and an electronic braking system, which can effectively ensure the travel safety of cement prevention in different cement factories.

• Axles and Tires

  Generally, a concrete mixer truck will have 2 to 4 axles. An axle is a crucial part of the mixer truck, allowing the truck to move and distribute weight. It directly connects the wheels, rotates together with them, and transfers the engine power that makes the truck move. Each axle has a center bar and tie rods. Mixer trucks with two axles are considered standard vehicles and are mostly used in small-scale mixing operations. Depending on region, market demand, and customer preferences, they can be configured to have either an imperial or metric system of measurement. Mixer trucks with three axles are known as medium-duty trucks and are typically used for residential and commercial projects. They can come with front-wheel and drum brake systems. Heavy-duty mixer trucks with four axles are used for large-scale industrial and infrastructure projects where high-volume concrete production and delivery are required.

Maintenance

• Daily check:

  It is important to properly inspect the truck daily, including its diesel pump motor, water pump motor, belt, hose, and hydraulic system for any leakage indication or hydraulic system errors. In addition, remember to check the integrity of the mixing drum, feeding bracket, and discharge hole pipeline to ensure that there are no loose and damaged parts that can create any safety hazards. Checking the oil pumps and their motors, the gearbox, reducing gearbox, bearings and seals, and the oil and grease pipeline system is crucial to ensure proper mixer truck machine operation and avoid premature equipment failure and unscheduled downtime. Don't forget to give special care and attention to the truck's tires. Thunder, lightning, and stormy weather can cause rapid tire pressure loss. Conduct a thorough examination to identify any defects or issues that need to be addressed beforehand.

• Weekly check:

  After doing the daily check-up as mentioned above, conduct a thorough washing of the mixer truck. Ensure that the mixing drum and water pipelines are clean and the system is lubricated. Also, make sure that feeding frames and outlets are not clogged with any obstructions. Pay special attention to mechanical parts that require lubrication, such as gears, fulcrums, and bearings. Relieve pressure from the water pipelines after use and conduct a systematic lubrication inspection of the whole vehicle system.

• Monthly check:

  It's crucial to identify and replace worn-out parts regularly to ensure the system's smooth operation. For instance, filters in the hydraulic systems, belts, clutches, hoses, and other easily consumable parts should be replaced or repaired on a monthly basis to ensure good mixing truck health. In addition, it's necessary to give special attention to the oil and grease pipeline system. High- and low-temperature weather conditions may cause the lubricant to degrade or deteriorate, resulting in friction and wear of mechanical parts. Therefore, taking some time out of the busy schedule and placing emphasis on the oil and grease system is paramount to keeping the entire truck mixer running smoothly.

Scenarios

Foton Auman Concrete Mixer Trucks have various applications due to their unique features that offer solutions to different types of customers' needs in the construction industry. Below are some of the usage scenario applications of Concrete Mixer Trucks:

• Large-scale Construction Projects:

Huge construction projects like bridges, dams, and high-rise buildings require substantial amounts of concrete. Concrete Mixer Trucks provide an efficient and cost-effective solution to transport the volume of concrete needed for such projects. Their mixing capabilities ensure that the concrete remains fresh and ready for use when it arrives at the construction site.

• Infrastructure Development:

Infrastructure development represents a key industry where Concrete Mixer Trucks are heavily utilized. Concrete Mixer Trucks play a vital role in the transportation and on-site mixing of concrete for various infrastructure projects. These Truck Mixers are used to create durable and strong foundations, roads, bridges, and other essential structures that support economic growth and connectivity.

• Urban Development and Public Construction:

Urban development projects often involve the construction of public infrastructure such as schools, hospitals, and transportation systems. Concrete Mixer Trucks are essential in supplying concrete for these projects. They ensure that high-quality concrete is readily available for the construction of essential facilities that serve the needs of urban communities.

Concrete Mixer Trucks offer a flexible and efficient solution to transport concrete. It supplies concrete for different construction needs throughout the process.

• Road Construction and Maintenance:

Concrete Mixer Trucks are used to supply concrete and asphalt for road construction projects. This includes the construction of new roads, highways, as well as the rehabilitation, repair, and maintenance of existing ones. Also, Concrete Mixer Trucks facilitate the transportation of concrete for other related infrastructure projects. This includes the construction of bridges, tunnels, and drainage systems that are essential to supporting the road network.

• Rural Development Initiatives:

Rural development initiatives often focus on improving infrastructure such as roads, bridges, and housing. Concrete Mixer Trucks are instrumental in these efforts. They ensure the timely and efficient supply of concrete for construction in rural areas, contributing to economic development and improved quality of life.

Concrete Mixer Trucks are essential in the construction of infrastructure in rural and underserved areas, which foster economic growth and connectivity.

• Commercial and Residential Construction:

Whether it's a commercial property, such as an office complex or a shopping center, or a residential development of apartment buildings or single-family homes, Concrete Mixer Trucks are integral to the construction process. These trucks ensure a consistent supply of freshly mixed concrete, crucial for various construction phases such as laying foundations, constructing walls, and creating structural elements.

Concrete Mixer Trucks are used in both commercial and residential construction to provide a steady supply of freshly mixed concrete, which is essential for building durable and long-lasting structures.

• Specialized Construction Projects:

In addition to the customized construction projects mentioned earlier, Concrete Mixer Trucks are also used to supply other construction materials. This includes self-compacting concrete, high-strength concrete, and fiber-reinforced concrete, among others. These specialized concretes cater to specific project requirements and challenges. For instance, self-compacting concrete is ideal for intricate formwork, while fiber-reinforced concrete offers enhanced durability and crack resistance.

Secondly, Concrete Mixer Trucks are also employed to transport concrete for non-conventional construction projects such as the 3D printing of houses and other structures. Whenever there is a need to use the concrete mixture in a unique way, there are Concrete Mixers that can do the job.

How to choose Foton Auman concrete mixer trucks

When selecting a Foton concrete mixer truck for sale, buyers should thoroughly analyze various factors to ensure they make a well-informed choice that satisfies their unique needs.

• Assess concrete mixer size and capacity

  Buyers should start by determining the quantity of concrete they intend to mix and transport in one trip. Furthermore, they should consider the types of projects they will use the truck for and the frequency at which they will need to mix and deliver concrete. After having the answers to these questions, buyers should look for a truck with a mixer size and capacity that aligns with their requirements.

• Evaluate engine power and fuel efficiency

  A concrete mixer's engine power contributes to its performance and ability to carry heavy loads. Therefore, buyers should choose a truck with sufficient engine power to ensure smooth mixing and transportation, even in challenging road conditions. Buyers should also consider selecting a truck with a fuel-efficient engine to minimize operating costs and reduce environmental impact.

• Examine the mixer type and mixing quality

  When choosing a truck mixer, buyers should be aware that different types of mixers have distinct advantages. For instance, a drum mixer offers continuous mixing, while a pan mixer is ideal for high-quality concrete production. Therefore, buyers should carefully evaluate the benefits and limitations of the Foton mixer they are considering and select one that aligns with their project needs.

• Consider the truck's overall condition and maintenance history

  Like any other vehicle, a concrete mixer truck's overall condition influences its performance and longevity. Buyers should consider those trucks in good condition with effective maintenance records. Additionally, a well-maintained truck is less likely to experience breakdowns and will require less frequent repair and maintenance.

• Safety features and regulations compliance

  Buyers should prioritize trucks with features that enhance safety. Such features include advanced braking systems, visibility aids, and secure loading mechanisms. Additionally, since compliance with regulatory requirements is critical, buyers should ensure their truck mixers comply with safety regulations set by the authorities in their respective regions.

Foton Auman concrete mixer truck FAQ

Q1: What are some trends influencing the concrete mixer truck market?

A1: The demand for green fuel mixer trucks is growing as construction companies seek eco-friendly solutions. More mixer trucks are being equipped with smart fuel efficiency systems. There is also a rising demand for self-loading mixer trucks among urban construction projects.

Q2: What is the lifespan of a concrete mixer truck?

A2: With proper maintenance, a concrete mixer truck can serve between 10 to 15 years before needing to be replaced.

Q3: How often does a concrete mixer truck need to be maintained?

A3: Routine maintenance occurring every one to two months is sufficient for a concrete mixer truck. But, daily inspections should be done to identify any potential issues that may require immediate repair.

Q4: What is the impact of the concrete mixer truck on the economy?

A4: The truck facilitates the timely delivery of concrete to construction sites. This helps to boost productivity in the construction sector. More efficient mixing trucks are supporting infrastructure development, which is driving economic growth.