(454 products available)
Ready to Ship
Ready to Ship
G4 LED 12V 1.5W lights have different types and combinations. Here is a list of some of them:
G4 LED Light Bulbs
These bulbs are characterized by two or more LED chips connected in series. They have a higher brightness output and lower power consumption. Their lifespan is longer than that of conventional halogen bulbs.
These bulbs generate less heat and have a voltage drop of about 2.8-3.0 volts. The chips in the series share the forward current, and the efficiency increases with the number of chips.
G4 LED DC Bulbs
These bulbs are made with a built-in driver circuit. This allows them to be used with DC voltage sources. They have a higher energy efficiency and longer lifespan than traditional halogen bulbs.
The forward current of these bulbs is not shared by the series-connected LEDs. They have a heat sink that is externally mounted. The LEDs can be connected in parallel or series in the driver circuit.
G4 LED AC Bulbs
These bulbs are made with multiple LED chips connected in parallel. This allows them to be used with AC voltage sources. They have a higher lumen output than traditional halogen bulbs.
These LEDs have a compact design and can be mounted on a PCB. They have a built-in driver circuit that provides rectification and voltage stepping. These LEDs have a lower forward voltage drop and can be replaced with halogen bulbs.
G4 LED Bulbs with Dual Filaments
These bulbs consist of two thin wire filaments. One is located near the base, and the other is closer to the center. They are made to be used in applications with low ambient temperatures.
They are more efficient than halogen bulbs. These filaments are made of tungsten and can withstand high temperatures. The bulbs are compatible with a wide range of dimmers.
When looking at LED lighting, it is important to understand the features and functions so that the right type can be chosen.
Power Consumption
The LED light is designed to use as little power as possible. This makes it useful for applications where there is a limited amount of power available. This could be in a small electronic device or when using a solar panel.
Voltage Compatibility
The LED light can be used with 12-volt power sources. This is a common voltage level used in many areas, such as automotive lighting and marine electronics. The LED can easily be used in any 12-volt system.
Brightness
When it comes to brightness, the G4 LED light has a good amount. Brightness is measured in lumens, and this light produces 150 lumens. This means that it can produce enough light to be used in many different applications.
Color Temperature
Color temperature is measured in Kelvin (K). The G4 LED light comes in different color options. These range from 3000K, which is a warm light that is similar to traditional incandescent bulbs, up to 6000K. This is a cool light that is similar to daylight.
Long Lifespan
One of the main advantages of LED lighting is that it lasts a long time. The average lifespan of the G4 LED light is around 30,000 hours. This means that it will need to be replaced less often than other types of lights.
Dimmability
Some G4 LED lights can be dimmed. This allows the amount of light to be changed depending on what is needed. Dimming the light uses less power and helps extend its life.
Compact Size
The G4 LED light is small. This makes it useful for when space is limited. It can be used in small light fixtures or in appliances where a standard-sized bulb won't fit.
High Efficacy
The LED light converts power into light efficiently. This is measured in lumens per watt. The higher the number of lumens per watt, the more efficient the light is. This means that less power is wasted as heat.
G4 LED 12V 1.5W lights have a wide range of applications in various industries and settings. Here are some common usage scenarios:
Automotive Lighting
These LEDs are often used in automotive applications such as brake lights, tail lights, parking lights, reverse lights, license plate lights, interior lights, and dashboard illumination. They provide brighter and faster illumination, enhancing safety and visibility on the road.
Marine Lighting
They are commonly used in boats, yachts, and marine vessels for navigation lights, interior lighting, exterior lighting, and engine compartment lighting. Their low power consumption and long lifespan make them suitable for marine environments.
Camping and Outdoor Gear
These LEDs are widely used in camping gear such as tents, awning lights, camping trailers, portable lanterns, and headlamps. They provide bright, efficient, and long-lasting light sources for outdoor activities and emergencies.
Architectural and Landscape Lighting
They are used in architectural lighting fixtures such as wall washers, spotlights, recessed lighting, and landscape lighting. They offer various colors, high lumen output, and dimming capabilities to highlight architectural features and landscapes.
Recreational Vehicles (RVs) and Trailers
These LEDs are used in RVs and trailers for interior lighting, exterior lighting, compartment lighting, andLicense plate lighting. They consume less power from the RV's battery and have a longer lifespan than traditional incandescent bulbs.
Home Lighting
G4 LED lights are used in household applications such as desk lamps, under-cabinet lighting, pendant lights, chandeliers, and accent lighting. They provide energy-efficient and long-lasting illumination for different home areas.
Electronics and Gadgets
These LEDs are used in various electronic devices and gadgets such as printers, scanners, computer peripherals, gaming consoles, and digital displays. They offer compact lighting solutions with high energy efficiency and brightness.
Jewelry Display Lighting
They are commonly used in jewelry display cases, retail stores, and exhibition booths to highlight and illuminate jewelry pieces. Their low heat output, high color rendering index (CRI), and adjustable colors make them suitable for showcasing jewelry.
When selecting a G4 LED light, consider the following factors:
Brightness
The brightness level of the LED lights should be checked. This is because, depending on the use, different levels of brightness will offer different levels of satisfaction. Buyers who intend to use the LED lights for decorative purposes should settle for lights with lower lumens. However, those intending to use them for general illumination should go for the ones with higher lumens.
Color temperature
Color temperature is a critical factor that should be considered when choosing G4 LED lights. The color temperature is measured in Kelvin. Buyers should look for lights with color temperatures that are suitable for their intended uses. For instance, those using the lights for ambient lighting should go for warm white lights. At the same time, those using them for task lighting should opt for neutral or cool white lights.
Power consumption
One of the main reasons buyers choose LED lights is to reduce energy costs. As a result, it is important to get the most out of their lights by getting G4 LED lights that consume the least amount of power without compromising on performance. For this reason, it is important to check the power consumption ratings of the different LED lights before making a choice.
Compatibility
Before choosing G4 LED lights, it is important to ensure that the lights are compatible with the existing hardware. This includes items like dimmer switches and lighting fixtures. This is because in some cases, when G4 LED lights are used with specific hardware they are not compatible with, it can lead to issues like flickering or even malfunctioning.
Quality of light
It is also important to ensure the G4 LED lights have a good quality of light. This can be done by checking the CRI or Color Rendering Index ratings. The CRI index is a scale that measures how well colors appear under a particular light source. In this case, buyers should look for LEDs with a CRI of 80 and above.
Q1: What is the difference between LED and halogen bulbs for G4 fittings?
A1: LEDs are more energy-efficient and have a longer lifespan than halogen bulbs. They produce less heat and are available in various color temperatures. Halogen bulbs provide a bright, white light but are less energy-efficient and have a shorter lifespan than LEDs.
Q2: How can one determine if a G4 bulb is compatible with a specific transformer?
A2: Check the transformer's specifications to ensure it is compatible with LED bulbs if one is considering using G4 LED bulbs. LED bulbs require a transformer specifically designed for LED lights.
Q3: Can G4 LED bulbs be used outdoors?
A3: Some G4 LED bulbs are suitable for outdoor use if they are waterproof and dustproof. Always check the manufacturer's specifications to determine the bulb's suitable usage areas.
浙公网安备 33010002000092号
浙B2-20120091-4