(1561 products available)
Ready to Ship
Ready to Ship
Ready to Ship
A pit bike 125cc engine is a tiny, lightweight motorcycle. It is perfect for beginners. The 2 stroke dirt bike 125cc engine generates more power than the smaller one. It is also lighter and easier to handle than the bigger engines. The 125cc engine is great for learning and a lot of fun to ride. The engine is available in four types:
Motor oil is the lifeblood of the pit bike 125cc engine. It lubricates the moving parts and helps to keep the engine cool. Using the right type of oil is crucial. Look for oil that's specifically made for 4-stroke engines. The oil should have an SAE rating of 10W-40 or 20W-50. Change the oil after the first two to three hours of riding. Afterward, change the oil every 15 hours of riding or once a month, whichever comes first. This will help to keep the engine in good shape.
It is important to check the oil level before riding the bike. First, make sure the bike is on level ground. Next, pull out the dipstick, which is used to check the oil level. Wipe it with a clean cloth before putting it back in. Take it out again and check the oil level. The oil should be in between the high and low marks. If the level is low, top up the oil. Overfilling the bike with oil is also not advisable. This could cause the oil to leak out of the engine.
The oil filter should be changed when changing the oil. This is because the oil filter is used to remove dirt and contaminants from the oil. A clogged oil filter could cause the engine to wear out. Only use oil filters designed for the bike's engine. This will help to protect the engine.
There are valves in the engine that need to be checked and adjusted from time to time. The valves need to be checked after the first three hours of riding the bike. After that, check the valve clearance every 15 hours of riding. This is done to ensure that the valves open and close properly. Look through the bike's manual for the valve clearance specifications.
The spark plug is responsible for igniting the fuel-air mixture in the engine's cylinder. It needs to be replaced after the first 20 hours of riding. Afterward, change the spark plug every 30 hours of riding.
The carburetor mixes air and fuel for combustion in the engine. If the carburetor is not properly adjusted, the bike may not start or run well. Look through the bike's manual for the correct carburetor settings.
Make sure the cooling system is working properly. The cooling system prevents the engine from overheating. Check if the radiator is leaking or clogged. Also, look at the hoses for any damage. Replace any damaged parts to avoid engine damage.
The drive chain moves power from the engine to the wheels. It should be lubricated and adjusted properly. Check the chain for any signs of wear and replace it when necessary. Also, look at the sprockets for damage and change them after 30 hours of riding.
The air filter traps dirt and debris from entering the engine. The air filter should be checked before every ride, especially in dusty environments. Clean the air filter periodically and replace it when it's worn out.
The engine mounts hold the engine in place. Check the engine mounts for any cracks or damage. Tighten any loose bolts and replace worn-out mounts.
Regular maintenance is important to keep the pit bike 125cc engine in good condition. Look through the bike's manual for the manufacturer's maintenance schedule. Stick to the schedule and perform all the necessary checks and replacements. This will help to ensure that the engine runs smoothly and lasts long.
In choosing a Pit Bike 125cc engine, buyers need to consider performance aspects. They need to assess the power output, which is usually measured in horsepower. A higher horsepower indicates a more powerful engine that can provide greater acceleration and top speed. The engine's torque, measured in pounds-feet, also needs to be considered. The engine's ability to deliver power at lower speeds and improve acceleration is indicated by higher torque ratings. Furthermore, business buyers need to consider the engine's compression ratio. A higher compression ratio indicates more efficient fuel combustion, resulting in increased power and performance. It is important for them to check for any additional performance enhancements, such as improved intake and exhaust systems.
Buyers need to ensure that the ssr 125 engine they choose is compatible with the pit bike's frame and other components. They need to check the engine mounting points and dimensions to ensure a proper fit without modification. Additionally, they need to consider compatibility with the bike's transmission system, sprockets, and chain size to ensure smooth operation and optimal performance.
While considering weight and size, business buyers need to consider the pit bike's handling and performance by choosing a 125cc dirt bike engine that adds minimal weight to the overall bike. Also, they need to consider the engine's physical dimensions to ensure proper fitment within the pit bike's frame and other components.
Business buyers need to consider the reliability and durability of the ssr 125 motor. They need to research the engine's reviews and ratings to assess its reliability based on other experiences. Moreover, they need to check the warranty period offered by the engine manufacturer, as a longer warranty period indicates more confidence in the engine's durability and reliability.
Business buyers need to consider the availability of after-sales support when selecting a ssr 125 engine. They need to ensure that the engine supplier provides adequate customer service, technical support, and spare parts availability. Additionally, they need to research the supplier's reputation and reviews to assess their after-sales support services.
Replacing a 125cc dirt bike engine requires mechanical expertise and skills. However, with the right tools and knowledge, it can be done. Here is a step-by-step guide on how to replace a 125cc engine.
Park the bike on a flat surface and disconnect the battery. Drain the fuel tank and remove the carburetor. Remove the exhaust pipe and unscrew the engine mounting bolts. Once the engine is loose, remove the chain and sprocket.
Remove the spark plug cap, the kick start lever, and the gear shift lever. Disconnect the wiring harness and remove the engine from the frame.
Mount the new engine into the frame and reattach the engine mounting bolts. Reconnect the wiring harness, the gear shift lever, and the spark plug cap.
Reinstall the chain and sprocket, the exhaust pipe, and the carburetor. Refill the fuel tank and connect the battery. Perform a test run to ensure the new engine is working properly.
Q1. What is the difference between a 110cc and a 125cc pit bike engine?
125cc pit bike engine is more powerful and faster because it has a higher displacement. It can also carry heavier riders and provide better acceleration.
Q2. How many horsepower does a 125cc 4 stroke engine have?
Generally, a 125cc 4-stroke engine produces between 7-9 horsepower.
Q3. How often should the oil be changed in a 125cc pit bike engine?
Engine oil should be changed every 15-20 hours of riding in a 125cc pit bike engine. However, it can be changed depending on how and where the bike is used.
浙公网安备 33010002000092号
浙B2-20120091-4