(452 products available)
Ready to Ship
Ready to Ship
Ready to Ship
Ready to Ship
PV solar modules 160W are available in different types, each with unique characteristics suitable for diverse environments and applications. These differences largely inform the product choice based on installation requirements, regional climate, and available space.
Monocrystalline PV Solar Module 160W
Monocrystalline solar panels are made from a single crystalline silicon structure. This process of development gives the resultant solar cells a uniform and dark appearance, which is quite premium and visually appealing. Among the different types, this is the most energy-dense. They have efficiency ratings of 15%-20%, meaning they can produce more power than others, especially in limited space. They also perform relatively well in low-light conditions. Due to their premium build and efficiency, they rank among the pricier options in the market.
Polycrystalline PV Solar Module 160W
Polycrystalline solar panels are made from silicon crystals, which are cast into molten and then cooled to form grains. This results in a blue, speckled appearance as opposed to the uniform look of monocells. The solar cells have a slightly lower overall efficiency and range between 13% and 16% and, therefore, require more space to generate the same power amounts. They are also less effective in low-light conditions than monocrystalline cells. Their manufacturing process is less energy-intensive, so they often cost less. The modules are, therefore, budget-friendly but compensate with lower performance in space-constrained environments.
Bifacial PV Solar Module 160W
Bifacial solar panels can capture sunlight from both sides. They are either monocrystalline or polycrystalline and have an added layer of transparency on the rear side. Energy collected from reflected sunlight off the ground or nearby surfaces increases overall daily energy production. Most modules have an efficiency rating of around 15%-18%. They are ideal for installations with reflective ground materials, like white gravel, sand, or concrete.
Thin-film PV Solar Module 160W
A thin-film solar panel is made by depositing very thin layers of photosensitive materials, such as cadmium telluride, amorphous silicon, or copper indium gallium selenide, onto a substrate. The result is flexible and lightweight panels that are much easier to install than traditional solar panels. However, they have much lower efficiency, usually ranging from 10%-12%. This means they require a lot more space to generate comparable amounts of energy. Being adaptable, they perform well in low-light conditions and even high temperatures.
Agricultural Operations
The module is used to power water pumps, irrigation systems, and other farming equipment. The PV system can support off-grid heating of water for livestock or greenhouses, especially in remote areas where conventional power isn't achievable. The module also helps in running refrigeration systems for storage and transport of perishable farm products like fruits, vegetables, dairy, and meat. Overall, the PV system increases productivity and sustainability in agricultural practices by giving a reliable energy source.
Remote Area Power Supply
The module gives an off-grid solution for electricity in areas lacking access to traditional power grids. They can provide a reliable energy source for homes and businesses in remote locations. This ability makes them especially helpful in areas with either unreliable infrastructure or no access at all. The module's capacity is enough to power basic appliances in homes like lights, televisions, refrigerators, and water pumps. In remote businesses, it can support commercial activities like running a small store, workshop, or ecotourism facility.
Telecommunications and Monitoring Systems
The module provides a reliable energy source to power telecommunication towers, satellite systems, and remote monitoring equipment. These are often placed in areas where there is no access to conventional energy sources. They ensure these systems continue to operate effectively without needing battery replacement. The modules are suitable for powering off-grid communication devices, two-way radios, and satellite phones. They are also used to power remote environmental monitoring systems, weather stations, or scientific instruments that require constant energy.
Energy for Charge Systems
PV solar modules 160W power electric vehicles and equipment charging stations. These are quite helpful in areas where there is no access to the electrical grid or to promote sustainability within an existing charging infrastructure. The charger only requires one solar panel, so the modular design allows easy expansion for more charging stations by adding more solar panels, space, or power needs. They help to reduce reliance on fossil fuels by using sunlight to charge electric vehicles, batteries, or other electric equipment, contributing to a greener energy ecosystem.
Energy Independence
Using a solar module PV is a way to gain energy independence from the rising dependence on fossil fuels and electricity grids. It allows individuals and communities to generate their own clean and renewable energy, reducing reliance on external energy sources. The energy independence reduces vulnerability to energy price fluctuations. This is quite important in remote areas without access to conventional power grids. With PV solar modules, one can have uninterrupted energy access throughout the day.
Low Maintenance
Solar panels and modules have no moving parts. This makes them very resilient and, hence, a low maintenance requirement. They are very durable and can withstand exposure to the elements. They require periodic inspections and cleaning to remove dust, debris, or other contaminants. This is done to ensure optimal performance. Maintenance costs are pretty low compared to other energy systems. The long lifespan, usually around 25 years on average, means minimal maintenance over the lifetime of the system.
Environmentally Friendly
Solar modules are made and engineered to help create a sustainable future through cleaner energy. The energy generated during the solar panels' lifetime produces little to no greenhouse gas emissions or air pollution. Unlike fossil fuels, which release harmful emissions into the atmosphere, contributing to global warming, climate change, and health problems. The modules also contribute to reduced water usage since solar energy requires little to no water for its operation compared to other energy generation methods like coal or natural gas.
Quiet operation
Solar panels operate quietly, without the noise associated with many other energy generation methods. They harness sunlight to convert it into electricity. This works without any mechanical moving parts, so the panels generate little to no audible sound during operation. This makes them a suitable choice for generating energy in residential areas or other spaces, where noise levels need to be kept to a minimum. Users can benefit from clean energy without the disturbance that often comes with generators or industrial power plants.
Solar cell type
Different solar cells have different efficiencies, costs, and space requirements. Monocrystalline cells are highly efficient but cost more. Polycrystalline cells are less efficient but cheaper. Bifacial and thin-film cells come with their own efficiency and application characteristics. The choice will determine how much energy the system can generate and whether the available space is adequate to accommodate the energy needs.
Efficiency of the solar panel
This is how effectively the solar panel converts sunlight into electricity. Higher efficiency panels will generate more electricity in the same amount of space. This is very important where installation space is limited. However, high-efficiency panels may come as a higher cost, although prices tend to be more competitive over the years.
Quality and durability
Quality and durability directly affect how long the solar panel will last and, thus, its performance over time. Check for warranty periods, certifications, and reviews to gauge the panel's longevity and ability to withstand extreme weather conditions. Panels with a longer warranty (typically 25 years) often are a good quality indicator.
Cost considerations
The cost will determine which module is more economically viable. First, the initial outlay is to be compared. This includes the costs of the module. Then, how much total costs will have to go into maintenance and operation over the lifetime of the module. It should also be compared against what the average or expected savings are as a result of installing the module in the first place. Do not forget to factor in potential incentives and rebates that might be available. These factors can considerably help offset initial financial costs.
Thus, the PV solar module is the most critical part of a solar power generation system. It converts sunlight into electrical energy. Multiple solar panels are combined together to form a solar photovoltaic array.
There's no noise while generating electricity. It is quiet indeed, a trait that makes them good for homes and areas that require low noise levels.
The solar panel module can still generate electricity even on cloudy days. Although power generation will, of course, be lower than sunny skies.
Unlike the PV solar modules, there are sunlight. They do not generate any electricity at night. However, they can be used with solar battery systems. The batteries will store energy for use at night or during power outages.
Cleaning is not required frequently. It can clean naturally by rain. In some areas with heavy dirt or dust, the panels may need to be cleaned more often. Cleaning helps maintain maximum efficiency and production.
浙公网安备 33010002000092号
浙B2-20120091-4