(921 products available)
Ready to Ship
Ready to Ship
Ready to Ship
4Y Toyota Engines:
Also known as the Toyota 4Y engine, this is the most common type of the 4Y engine. This engine was used in the majority of Y-series engines. The 4Y engine is a four-cylinder, in-line, water-cooled engine with a cast-iron block and head. The bore and stroke of this engine are 92 mm and 100 mm, respectively. The 4Y engine has a compression ratio of 8.3:1. This engine uses a single Downdraft 4Y carburetor. The fuel used in this engine is petrol. The 4Y engine produces a maximum power output of 62 kW at 4,000 rpm and a maximum torque of 140 Nm at 2,800 rpm.
4Y-BT Toyota Engines:
The Toyota 4Y-BT engine is a turbocharged variant of the standard 4Y engine. This engine is commonly found in some models of the Toyota Hilux and Land Cruiser. The 4Y-BT engine has a compression ratio of 8.5:1. It has a maximum power output of 80 kW at 4,000 rpm and a maximum torque of 200 Nm at 2,800 rpm.
4YB Toyota Engines:
The 4YB engine is another variant of the Toyota 4Y engine. The 4YB engine is a 4-cylinder, inline, and water-cooled engine. It has a cast-iron cylinder block and head. The 4YB engine has a compression ratio of 8.8:1 and a maximum power output of 66 kW at 4,000 rpm and a maximum torque of 145 Nm at 2,800 rpm.
4Y-BG and 4Y-BG-CTO:
The Toyota 4Y-BG engine is a variant of the 4YB engine. This engine is a petrol engine that is commonly used in some models of the Toyota Land Cruiser. The 4Y-BG-CTO is a modified version of the 4Y-BG engine that meets the emission standards. The bore and stroke of the 4Y-BG engine are 92 mm and 100 mm, while the bore and stroke of the 4Y-BG-CTO are 93 mm and 102 mm, respectively. The 4Y-BG-CTO engine has a maximum power output of 75 kW at 4,000 rpm and a maximum torque of 160 Nm at 2,800 rpm.
Engine Type:
The Toyota 4Y engine is an inline 4-cylinder engine with a 4-stroke cycle. It is also a naturally aspirated engine.
Displacement:
This engine has a displacement of 2.4 liters (144 cubic inches) or 2400 cubic centimeters.
Compression Ratio:
Compression ratio refers to the ratio of the cylinder's volume when the piston is at the bottom dead center (BDC) to the volume when the piston is at the top dead center (TDC). The Toyota 4Y engine has a compression ratio of 8.8:1 to 9.5:1.
Power Output:
The power output for this engine is within the range of 89 to 100 horsepower (66 to 74 kW). The horsepower for each engine variant differs. For instance, the Toyota 4YB engine variant produces up to 100 horsepower.
Torque:
The Toyota 4Y engine has a torque range of 148 to 155 lb-ft (200 to 210 Nm). The torque is produced at a range of 2400 to 2800 revolutions per minute (RPM).
Bore and Stroke:
The bore is the diameter of the engine's cylinder, while the stroke is the distance traveled by the piston in the cylinder. The Toyota 4Y engine has a bore of 92.0 mm (3.62 in) and a stroke of 97.0 mm (3.82 in).
Firing Order:
The 4Y engine has a firing order of 1-3-4-2. This is the order in which the cylinders fire and is crucial for the engine's smooth operation.
Weight:
The Toyota 4Y engine weighs about 130 kg (290 lb). The engine's weight is a crucial factor in vehicle design and performance.
Fuel System:
The fuel system supplies fuel to the engine for combustion. The Toyota 4Y engine uses a carburetor-based fuel system, which is common in older engine designs.
Cooling System:
The Toyota 4Y engine uses a water-cooled system to maintain optimal operating temperatures and prevent overheating.
Ignition System:
The ignition system is responsible for igniting the fuel-air mixture in the engine's cylinders. The Toyota 4Y engine has a conventional ignition system with a distributor.
Maintenance:
Maintenance suggestions for the Toyota 4Y engine include:
-Follow the manufacturer's recommended maintenance schedule.
-Use the recommended engine oil and change it regularly.
-Replace the engine's air filter periodically to ensure proper airflow.
-Maintain the cooling system by checking coolant levels and conditions.
-Use the recommended fuel type and quality.
-Inspect and maintain the ignition system, including spark plugs and wires.
-Perform regular inspections and address any visible leaks or issues.
-Follow the manufacturer's guidelines for using additional accessories.
When choosing a Toyota 4Y motor, consider the following factors:
Power Requirements:
The expected power and performance levels should be considered. A more powerful engine will be required if high power output is needed for heavy loads or steep inclines than if a more moderate power output is sufficient.
Fuel Efficiency:
Fuel efficiency is an important consideration. The 4Y engines with higher fuel efficiency ratings will save money on fuel costs over time, even if they have a slightly higher initial purchase price. Other factors that affect fuel efficiency include the engine's size, configuration, and tuning.
Maintenance Requirements:
Maintenance requirements should also be considered. Some engines require more frequent oil changes or air filter replacements than others. Consider the cost and availability of replacement parts, as well as the frequency and type of required maintenance.
Engine Size:
The size of the engine may affect the choice. Larger engines generally provide more power but are heavier and may be more expensive. Consider the desired balance between power and weight/cost.
Emissions:
Newer engines typically have lower emissions than older engines. If emissions are a concern, consider choosing a newer engine that meets current emissions standards.
Noise and Vibration:
Noise and vibration levels may also be important considerations, particularly in applications where quiet operation is desired. Some engines are designed to operate more quietly than others, or noise and vibration can be reduced with additional soundproofing.
Replacing a Toyota 4Y motor can be a difficult task. It is advisable to read the repair manual to have a better understanding of the engine components before attempting to replace the engine.
Replacing the 4y engine will require some basic tools
To replace the Toyota 4Y engine, follow the steps:
Q1: What is the Toyota 4Y engine?
A1: The Toyota 4Y engine is a four-cylinder gasoline engine that was used in some Toyota vehicles, particularly in the Y-series engines. It is known for its durability and reliability, which are characteristic of Toyota's engineering standards.
Q2: Which vehicles typically use the Toyota 4Y engine?
A2: The Toyota 4Y engine was used in several Toyota vehicles, particularly in models designed for rugged use and durability, such as the Toyota Land Cruiser and the Toyota Hilux. However, the exact application can vary by region and model year.
Q3: What are the key specifications of the Toyota 4Y engine?
A3: The Toyota 4Y engine typically has a displacement of around 2.4 liters (2,400 cc). It has a bore and stroke of approximately 92 mm x 100 mm, and it uses a cast iron block and aluminum alloy head. The engine configuration is inline-4, and it is usually equipped with a dual overhead camshaft (DOHC) or single overhead camshaft (SOHC), depending on the variant. Fuel system options include carburetors or fuel injection, depending on the model year and variant.
Q4: What are the features and benefits of the Toyota 4Y engine?
A4: The Toyota 4Y engine has several features and benefits. Its features include a durable construction, overhead camshaft design, and a carburetor or fuel injection system. The benefits are its reliability, good performance, and fuel efficiency.
Q5: Is the Toyota 4Y engine still in use today?
A5: While the Toyota 4Y engine was widely used in the past, it has largely been replaced by more modern engines in most Toyota vehicles. However, it may still be found in some older vehicles and in some regions where older engine technologies are still in use.
浙公网安备 33010002000092号
浙B2-20120091-4